Written by
![Cable - DMX Lighting Lead 3-Pin XLR Female-Male for DMX Lights (1.5M) [#02568]](http://www.jackiemitchellmusic.com/images/e/370608546725_0.jpg)
| Powered by phpBay Pro |
Not sure how to wire my loud speakers?
Ok, so I have two B215A's by Behringer and they have one 1/4" input, one XLR input, and one XLR link output. I plan to hook these up to my laptop so I can run my DJ software. What I originally planed was using a 1/4" with a 1/8" adapter from the laptop to the first speaker. Then using a XLR female to 1/4" female adapter on the XLR link output of the first speaker and a 1/4" cable to the 1/4" input of the second speaker. Does anyone think this will work or should I go a different route?
Just remembered my laptop has two 1/8" outputs, so I might just be able to hook up both speakers that way?
If you can switch the speakers' XLR's to line level, I'd try an 1/8" to XLR out of the laptop to the first speaker, and gang the speakers XLR to XLR. Make sure all 3 devices are drawing current from the same circuit.
Can't see a real advantage or disadvantage in using both 1/8" outs.
| Powered by phpBay Pro |
