Written by
![Switchcraft D3F XLR 3-Pin Female Chassis Panel Connector Socket [#02882]](http://www.jackiemitchellmusic.com/images/e/280886101242_0.jpg)
| Powered by phpBay Pro |
XLR Connector to TRS Audio Configuration Question!!?
Hi, I would like to attempt to send audio from my Xbox 360, to my small BEHRINGER Xenyx 802 Mixer where I will receive it in my headphones via the headphone port.
I plan on plugging my Xbox 360 RCA audio Red and White Cables to my female RCA splitter to female 1/8 inch jack, which i will then use a 1/4 inch to 1/8 inch adapter to finally attach a 1/4 TRS Male to XLR Male and then into my mixer.
Will this have a chance at succeeding? I want to make sure I will be receiving stereo sound as well, not mono.
Thanks,
Josiah
Please don't do it that way!! (I have two Xenyx 802's)
All you need is two RCA "Y" cables and a pair of RCA to 1/4 inch cables. You do not need to use the XLR connectors on each channel - you should use the 1/4 inch input on each channel instead. The way you are doing it uses too many adapters and the XLR connector are not meant for a line output - they are designed for mic outputs.
Cables:
http://www.cablestogo.com/product.asp?cat_id=2009&sku=29737
http://www.zzounds.com/item--HOSCPR20
Connect the male end of each Y cable to the xbox red white rca outputs
Connect the RCA ends of the rca to 1/4 inch cables to one side of the Y cable
Connect the 1/4 inch ends of that cable to the Xenyx 1/4 inch inputs
Use the pan control on each channel on the Xenyx - pan the left channel all the way to the left and vise-versa for the right.
You now will be hearing the stereo output of the xbox through the mixer
| Powered by phpBay Pro |
